A Simple Guide to Paint Bumper Cover Easily at Home!

If you want to enhance the value and appearance of your car, painting a bumper cover is all you have to do. But, how? No doubt, rear or front bumper cover painted is the first line of defense. It is most scuffed, nicked, and cracked. And it is no surprise you can get readily available painted car parts in the market.


How to Paint Bumper Cover

Step1: Preparation

Your bumper should have either been primed with a black primer or raw. It becomes easy to sand the bumper with 600-grit keeping an eye out for any small imperfections. Take the grey scuff pad and abrade the entire surface of the bumper, especially those hard-to-reach areas. Use sandpaper for them. On the next, blow off the bumper with a blowgun.

Step 2: Clean for Paint

Find a spot to spray the part. It is possible to do proper ventilation in a garage if a spray booth is unavailable. Hover plastic sheeting over anything as you don't want to paint and get the spray everywhere. Utilize a fan to pull the overspray away from the garage. With the grease and wax remover, a mist of about a third of the bumper cover is possible. Next, take a paper towel folded into quarters and wipe to get it dried off. Repeat this procedure across the bumper's face. Blow off the bumper cover and grab your tack rag wiping the whole surface of the bumper cover.

Step 3: Sealer

Set your air pressure at the gun to 21lbs and make sure the pattern is consistent and light at the ends or in the middle. Painting a bumper cover helps you know how long you need to dry the product while adjusting the fluid knob once loading the sealer into your spray gun. Spray around each part's edge with a sight distance from the panel. It's a recoating time of about 5-10 minutes. Use lacquer thinner to clean your spray gun.

Step 4: Basecoat

Mix the basecoat as suggested in the product data sheets and according to the brand. Begin by spraying the edges, making the basecoat phase finished to coverage. Cover 2-3 coats on basecoats for better results.

Step 5: Clear Coat

A clean coat mixture comprises a hardener, clear coat, and reducer. The ratio varies and depends on the brand. Clean the coat until required.

Whether working on a 2011 Nissan maxima SV front bumper or any other car, you can take professional help if you don't have time or do not feel like painting the car on your own.



Popular posts from this blog

6 Ways To Make Shopping For Auto Body Parts Online Worth Your Time

Image
Finding the best auto body parts dealers in your city is not going to be easy. This is a purchase that tends to confuse a lot of people. The first thing that you want is that the replacement part you are looking for should match the color of your vehicle from every angle. The finish should be similar if not identical. If you are looking for a 2012 Hyundai Elantra rear bumper or a 2013 Malibu front bumper , you may also consider shopping online. But then there are several factors at play. The following section talks about a few considerations that you should always keep in mind whenever looking for any Acura TL front bumper cover or 2011 Nissan maxima SV front bumper in your local car parts store or an online marketplace. 1. Look For A Local Supplier If the car parts have been sourced from a local supplier, chances are that the materials have been sourced from local factories as well. This makes the entire product quite affordable. It also means that the delivery of the replacement pr
Read more

Four DIY Car Paint Mistakes You are Creating

Image
Giving touch up to a few dents and scratches on Hyundai Elantra's rear bumper or any other car by yourself can be daunting. Car painting is not all about painting and applying it like nursery kid drawing. There are some steps to follow so that you create no mistakes. Read on this post to learn about them- 1. Using the Wrong Sandpaper The biggest mistake car owner makes is not using the sandpaper correctly and the right one. Sandpapers have different purposes. Some are used for automobiles, while some are used for woods. Using the wrong sandpaper would lead to scratching the car further. A scratched car has dust, dirt, grime, and road grease, which, if not removed properly, can fail the car painting process. 2. Painting in the Summer Heat Choosing hot and humid days to paint a car while thinking the paint can dry fast impacts the painting process. The issue with painting on hot days is that the paint's behavior changes leading to bubbling, blotches, and discoloration. However,
Read more

Buying Car Parts Online - 3 Red Flags That Might Make You Worrisome

Image
There are certain red flags that you should always be aware of whenever making an online purchase. When it comes to buying something like painted bumpers online or a 2004 Acura TSX front bumper, things get a little more serious. These are big investments and you don't want to go wrong with them. Look out for the following 3 major red flags to always avoid: · Match the Original with Generic Whether you have chosen a Hyundai Elantra rear bumper or a Toyota tundra painted bumper, you will have to match the features and the size and proportions of the aftermarket car parts with those of the original parts. All these properties or features of these parts should be similar if not identical to one another. This is the only way to ensure that you end up with the most correct and relevant car part and not just a cheap copy of the original. You will also have to make sure that the car part you invest in can fit onto your automobile correctly. There should not be any size differences betwee
Read more